Brush cleaning for sheets, blanks and coil material. No water, no drying step, no waste water. At a fraction of the running cost of a wash line.
Brush cleaning is the standard for the press shop and stamping. Spray cleaning with ROTOL nozzles is the alternative for aluminium components, where brushes reach their limits.
Two-sided brushes top & bottom, 120 m/min. Pressure-buffer correction system with an air cushion — bristles stay perpendicular despite ±1.5 mm surface unevenness.
Cleaning and oiling in one system, over one controller. One commissioning, one maintenance. The standard for high-volume press shops.
Two-stage stainless-steel spray cleaning with ROTOL nozzles top and bottom. With a blow-off unit after each stage. For aluminium components where brushing isn't enough.
A wash line consumes water, detergent, energy for drying — and produces waste water. Brush cleaning does none of that.
No water consumption, no detergent, no heating energy for drying. The recurring costs are a fraction of what a wash line eats up.
The part leaves the system dry. Downstream processes — forming, oiling, painting — carry on without a wait.
Steel and aluminium in alternating operation, with no changeover and no lost time. The brush adapts to different material thicknesses.
Send us the operating costs of your current wash line and where your contamination profile stands. We'll cost brush cleaning against it — honestly, with numbers.